informatica

Individual #1: Monitoreando valores #include "DHT.h" // Uncomment whatever type you're using! #define DHTTYPE DHT11   // DHT 11 //#define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321 //#define DHTTYPE DHT21   // DHT 21 (AM2301) // Connect pin 1 (on the left) of the sensor to +5V // NOTE: If using a board with 3.3V logic like an Arduino Due connect pin 1 // to 3.3V instead of 5V! // Connect pin 2 of the sensor to whatever your DHTPIN is // Connect pin 4 (on the right) of the sensor to GROUND // Connect a 10K resistor from pin 2 (data) to pin 1 (power) of the sensor int DHTPin = 5;     // what digital pin we're connected to DHT dht(DHTPin, DHTTYPE); void setup() {    Serial.begin(9600);    Serial.println("Moniteroando valores");     dht.begin(); } void loop() {    // Wait a few seconds between measurements.    delay(2000);    // Reading temperatur